Become an Electrical Design Engineer
Burraq Engineering Solutions is a company that provides electrical design services for various types of projects, including “Electrical Design Engineer”. This may refer to the design and implementation of electrical systems for facilities used for training or educational purposes, such as military or vocational training centers. The specific range of services offered by a company may vary, but they may include things like power distribution, lighting, communication systems, and other electrical infrastructure.
Designing Purpose:
It is a training program that focuses on teaching individual skills and the knowledge needed to design and implement electrical systems for facilities used for training or educational purposes. This can include things like power distribution, lighting, Communication systems, and other electrical infrastructure. This type of training may be for electrical engineering professionals or individuals who wish to enter the field. It may be offered by a variety of organizations, including engineering consulting firms, commercial schools, or vocational training centers. Training may be delivered in a variety of formats, such as classroom instruction, online courses, or hands-on training
Become an Electrical Design Engineer Training course Details
- AutoCAD Electrical basics and Professional commands.
- NO contact, NC contact, Relay Coil, Timer coil, NO push button, NC
- push button, SP MCB:
- Copy and paste attribute symbols into palate and design center
- Discus types of electrical diagram
- How to make lighting distribution board (LDB) for story building
- Draw DB diagram with respect to different types of load. (SLD and
- power circuit & calculation)
- Load Balancing
- SLD of DB checking/finishing and discussion
- Draw SLD of motor control center (MCC), motor calculation & selection
- method of motor components
- SLB MCC diagram checking/finishing and discussion
- Study and understand DOL circuit and operation
- DOL starter diagram (used attribute & Dynamic blocks for control circuit)
- Study and understand ASD circuit and operation
- ASD starter diagram (used attribute & Dynamic blocks for control circuit)
- Study and understand REV/FOR circuit and operation
- REV/FOR starter diagram (used attribute & Dynamic blocks for control circuit)
- Checking schematic diagram of DOL, ASD & REV/FOR starters / fishing and discussion
- Overview about all international standard relevant to electrical switchgear fieldTypes of switchgear panels (slides), Types of diagram (slides)
- ANSI protection relay codes
- Switchgear device/components codes
- Draw the SLD & Schematic diagram of interlocking between 3 –motors with operating water level switches & lamp text facility and alarm acknowledge scheme
- Checked schematic & control circuit of motor interlocking/fishing and discussion
- Draw SLD, Schematic & diagram and interlocking of WAPDA & Generator
- source with using TP ACBs (LT Switchboard)
- Draw PFI diagram (SLD and power circuit)
- PFI diagram discussion and Calculation for Power factor bank.
- Wiring diagram of LT Switchboard
- Copper bus bar calculations
- ATS (Automatic Transfer Supply) Control Power diagram and Selection
- Transformer and Generator size calculation and Proposal
- Motor Control Center sizing i.e Breaker sizing according to NEC ,
- Contactor sizing, overload relay sizing, busbar sizing
- DOL, DOL 2 location, DOL long distance
- DOL Reverse Forward
- Star Delta
- Reverse Forward star delta
- Series Resistance Method
- Series Inductance Method
- Auto transformer Method
- Buzzer and Light indication for faults
- CT and PT calculation
- Cable sizing and BS/NEC standard for voltage drop of cable selection.
- Short circuit current calculation for breaker and cable selection
- Introduction to DIALUX Software
- How to Create Project in DIALUX and Project Settings
- Interface of DIALUX (like bars, buttons, objects, Lighting catalog, room editor, the guide etc.)
- Rectangular Room Lighting Design
- How to install Plugin and IES File
- Lighting Design in L-Shape Room
- How to Import CAD file in DIALUX
- Lighting Design of Rectangular Room using CAD File
- Lighting Design of Polygonal Room using CAD File
- Corridor Lighting Design using CAD File
- Emergency Lighting Design
- Wall Mounted Lighting Design
- Street Lighting Design
- Stadium Lighting Design
- Lighting Design using Blue Icon
- False Color Display and Objects in Room
- Perform all lighting calculation using DIALUX software
- Studying all types of lighting and choice of these types
- Studying all types of interior lighting
- Studying all types of exterior lighting
- Studying all lighting drawings and the quality, intensity and viewing
- Performing lighting analysis reports
- Full project exercise
- Home Wiring/Building Wiring
- Test for Building Wiring
- Continuity test
- Short circuit test
- Open circuit test
- Earth Leakage Test
- Polarity test
- Home wiring Principles and rules according to IEE Rules and Regulation
- Test with MultiMate, Series test lamp and Mugger for Home or Building
- Home wiring circuits and its applications
- One Lamp control
- Two Lamp in Parallel
- Two Lamps in series
- Staircase circuit
- Tunnel circuit
- Tube lights circuits
- Series test Lamp
- Panel testing using series test lamp or two lamp in series
- Testing of all circuits and practical’s of all circuits
- DB Design/Power DB Design SLD for multi storage building
- Single Line Diagram of Sub Main Panel /Main Panel
- ATS Panel
- Lighting Calculation, Lighting design and lighting plan with DIALUX
- Earthling and Grounding according to NEC Article 250
- Tower Calculation for Lighting Arrestor
- Cable Selection and format of reading a cable according to BS/NEC/IEC
- Load scheduling Transformer selection and Generator selection and Main
- bus bar selection
- Building/Home/Room Layout for lighting, fans or other equipment’s on
- LAYOUT Plan Drawings reading and working and conduit LAYOUT
- BOQ and SOP
- Cables and glands types
- SPDs and Lighting arrestors
- Cable Trays
- CCTV System
- Fire Alarm System
- Important Documents
- Cable schedule
- Material take off list
- ETAPSoftware Installation
- Introduction to ETAP Software
- How to Create a New Project in ETAP
- How to Load the existing Project
- Introduction to ETAP Database
- ETAP toolbar introduction
- One Line Diagram in ETAP
- Create your first one-line diagram
- Composite Network in ETAP
- Customize the library for the relay breaker and fuse
- Creating a template and importing it to one line diagram
- Load Flow Study Evaluation and Result Analysis
- Run Load Analysis on Single Line Diagram
- Equipment Evaluation
- Voltage Drop Calculations
- Bus Voltages, Cable voltage Drops
- Bus Under voltage
- Cable overload
- Cable Sizing Studies
- Transformer Overload
- Transformer Sizing
- Alert View in ETAP
- Critical and Marginal Conditions in ETAP
- Arc Flash and Short Circuit Analysis
- Run Short circuit and Arc Flash Analysis
- Short Circuit Current Evaluation
- How to Fault a bus
- Edit Study Case
- Motor Start Analysis
- Setting up the Motor Rating
- Motor Start static
- Setting up the Motor Events in Edit Study Case
- Starting Current and its Plot in ETAP
- Motor Start Dynamic
- Setting up the Motor Parameters
- Setting up the Motor Inertia, Load
- Motor Start Dynamic using VFD
- Breaker Settings
- CT settings
- How to generate a report on ETAP
- Introduction to ETAP Level 2 Training
- Introduction to EPLAN Software
- How to install the student version of Eplan
- How to solve problem with the installation of Eplan
- Electrical System Design
- Starting the problems New the variant of a symbol
- Import / Export symbols (Symbol exchange between symbol libraries)
- Most important tip when working with custom symbol libraries
- Layer management
- Working effectively in EPLAN
- Manage EPLAN pages (page types, number pages etc.)
- Understand EPLAN structures – with examples
- Page / Window macro – why and how
- Main function – contactor example, check EPLAN project
- The Plot frame – manage, edit, adjust – basic steps
- How to create project and set basic parameters in settings
- How to create plot frame for pages
- How to create plot form for beginning of the project
- How to create schematic electrical symbols and library of symbols
- How to create schematic of electrical circuits
- How to organize schematic circuits in Eplan
- How to add device for parts in Eplan
- How to add device for parts in Eplan
- How to create ma outing panel layout
- How to tag cable s – special case (requirement from some customers)
- A pump (electric motor) needs a possible phase switch – how to represent that?
- Cable core spares – what to do with them in a circuit diagram – two options
- Design in accordance with IEC 81346 & IEC 61355 standards
- Creating a Project
- Opening and Editing Pages
- Creating a Schematic
- Cross-References
- Selection of Parts & Creating External Parts
- Macro Concept
- Find & Replace identifiers
- Reports Generation
- Accessing of Master Data
- Project Management
- Export, Import
- Printing of Project
- The Reports (cables, terminals, parts…) – the faster and the better way
- Export EPLAN project to PDF or to DXF/DWG
- FINAL ASSESSMENT PROJECT
- Understanding BIM concepts and the role of Revit in electrical design.
- Introduction to the Revit interface, tools, and settings.
- Understanding how Revit supports interdisciplinary coordination in MEP systems.
- Learning about workspaces, toolbars, and panels.
- Customizing the user interface for electrical workflows.
- Navigating and managing views in Revit.
- Importing architectural models and linking external files.
- Understanding grids, levels, and reference planes.
- Using worksets to manage collaboration between team members.
- Assigning responsibilities for electrical systems.
- Creating circuit panels and distribution systems.
- Modeling lighting systems, power circuits, and devices.
- Adding transformers, panels, and switches.
- Connecting equipment to distribution systems.
- Analyzing electrical loads and balancing power distribution.
- Exporting load schedules for external analysis.
- Using built-in tools to perform load analysis.
- Running electrical system checks and error reports.
- Adding lighting fixtures and defining photometric properties.
- Creating lighting layouts for different spaces.
- Connecting lighting fixtures to electrical circuits.
- Designing control systems for lighting, such as dimmers and sensors.
- Creating and managing power circuits for devices and equipment.
- Understanding and performing voltage drop calculations.
- Optimizing power circuits to meet design standards.
- Customizing views to highlight electrical systems.
- Creating detailed schedules for electrical equipment, devices, and circuits.
- Managing quantity takeoffs and materials lists.
- Identifying and resolving clashes between electrical and other systems using coordination tools.
- Setting up worksharing environments for multiple users.
- Exploring cloud-based collaboration using Autodesk BIM 360.
- Modifying and reusing templates for future projects.
- Performing energy analysis for electrical systems in buildings.
- Integrating energy-efficient designs using Revit.
Become an Electrical Design Engineer
- Rs 50,000/-
- Course Duration 3 Months
- Online Session
- On Campus Lecture + Practical
- Video Lecture Available
- Urdu & English
- Fee: 50,000
- Duration: 3 Months
- Timing: 9AM-11AM, 11AM-1PM, 1PM-3PM, 3PM-5PM, 5PM-7PM, 7PM-9PM